A quick drying acrylic lacquer which combines the easy application of an aerosol with a multi-purpose hard wearing satin coating. In addition to it’s uses on timber, it can be used to protect papers, circuitry, metal and paintwork. When used over stencil and design work, test for suitability first. The use of a dust mask is strongly recommended to avoid inhalation of dust particles during spraying.
This product contains no CFC’s.
Directions for use
Shake well before use
This can contains an agitator to mix the contents.
Lathe and other woodwork.
After preparing the timber to a silky smooth surface it is important that either a Cellulose or Acrylic Sanding Sealer is used before the application of Acrylic Satin Lacquer. Chestnut Products’ Sanding Sealers are suitable for this; other should be tested before use.
Once the sealer as been allowed to dry and sanded, spray a thin even coat onto the surface at a distance of 10 to 12 inches (25 to 30cm). Under normal conditions the lacquer will be touch dry in 20 minutes. Up to two further coats may be applied if required, leaving 20 minutes between coats.
Non timber applications of Acrylic Satin Lacquer do not need the use of Sanding Sealer before application. The surface must be clean, dry and free from grease before spraying. Apply the lacquer as detailed above. After use it is recommended to spray the can whilst inverted to clear nozzle.
Nationwide delivery is available.
The cut-off point for next day delivery is 12:00pm.
All delivery times quoted are estimates only.
At the time of ordering, we will require any specific details relating to delivery.
All items will be wrapped in bubble wrap prior to shipping.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.